PVC Elastic Floor of 100% Hygienic Solution for Hospital Floor
Exclusisve surface treatment for enhanced performance in healthcare
- 100% Hygienic, no contamination & bacterial development.
- Stain barrier unrivalled level of stain and chemical resistance.
- High performance floorcovering for heavy traffic areas.
- No wax for life, easy to maintain with minimal environment impact.
- Highest indoor air quality.
|Name||PVC Floor in roll|
|Design||Different kinds of designs for your reference|
|Application||Perfect for hospital|
|Backing||Pvc Homogeneous Floors|
|Pattern||Rich colors avalibale|
|Abrasion group||T group|
2. Technical Specification
|Product Technical Specification|
|Overall thickness||EN 428||mm||2|
|Sheet/length of sheet||EN 426||cm / lm||200 / 20|
|Norm / Product specification||-||-||EN 649|
|European classification||EN 685||Class||34-43|
|Fir rating||EN 13501-1||Class||Bf1-s1|
|GB 8624-2012||-||B1(B-s1, t0)|
|Toxic testing||GB 18586-2001||-||Pass|
|Static electrical resistance||EN 1815||KV||<2|
|Electrical resistance||EN 1081||>109-1010|
|Slip resistance dry||EN 13893||-||>=0.3|
|Slip resistance Wet||EN 51 130||Class||R9|
|Abrasion resistance||EN 660.2||mm3||<=2.0|
|Abrasion group||EN 649||group||T|
|Dimensional stability||EN 434||%||<=0.40|
|Residual indentation||EN 433||mm||≈|
|Castor shair test||EN 425||-||OK|
|Thermal conductivity||EN 12524||W/(m.K)||≈0.25|
|Colour fastness||ISO 105 - B02||degree||>=6|
|Chemical products resistance||EN 423||-||OK|
|Anti-bacterial activity(E.coli-S.aureus-MRSA)(1)||ISO 22196||-||Anti-bacterial rate>99.9%|
|Anti-baterial and fungicidal||-||-||OK|
|Special maintenance treatment||-||-||Evercare TM|
|TVOC after 28 days||ISO 16000 - 6||ηg/m3||<10|
DavidSnow PVC Flooring Roll Selling Points:
NO CONTAMINATION areas between floor and wall covering. NO BACTERIA
Wallcovering offering PERFECT CLEANING CHARACTERISTICS (PUR
Protect): humidity resistant and ease of maintenance. No Bacteria
development with an adapted cleaning method(cleanrooms, operating
100% Durable flooring.
Adapted to INTERSE TRAFFIC. Staining resistance to healthcare
product (Eosing, loding)
Open angles for PERFECT CLEANING (mechanical and manul). The cove
former avoids any damage in angles where soiling could accumulate.
Rich Color Available:
1. The subfloor requirement before installation
To ensure a smooth installation, it is important to prepare the
surface onto which you’ll be laying your floor.
The most important thing is to have a dry, even and clean subfloor. If the floor is uneven (tile joints, parquet bevels or
any type of cracks), think about using a levelling compound. Clean
the subfloor thoroughly using a neutral cleaning product to clear
away any dirt or dust and make sure it is fully dry before you start.
2. PVC floor installation operating conditions
1). After the installation of ceiling, wall, water, electricity,
2). After indoor paint and brush work completion.
3). The base have been completed, the surface should be smooth, dry
and hard before doing the self leveling construction. It should be
no dust and dirty, no hollow, cracks and sand.
4). The relative humidity of the construction environment should be
around 20%-75%, more than 75% is strictly prohibited for
construction. The construction environment temperature should be
around 15℃ -35℃, It is prohibited construction if the temperature
is less than 5℃.
e. no cross construction.